旭サナック株式会社旭サナック株式会社

FAQ|FREQUENTLY ASKED QUESTIONS

About cleaning equipment

What kind of particles can be cleaned?
It can be used to clean the powder (glass cullet etc.) left after glass cutting, the residue after the photolithography process, and the dirt stuck in CMP polishing pads.
What cleaning liquid can be used?
Ultra-pure water, Deionized water and resistivity resistivity adjusted water (Added carbon dioxide or ammonia).
Do you sell this pump unit as the cleaning system?
We product and sell HPMJ and HSPJ cleaning system to install inside the cleaning system.
These pump units with nozzles can be retrofitted to your existing cleaning system in an optimal manner.
I want a quotation.
We will discuss the cleaning object and your requirement etc., and then provide you with the optimal quotation. Please contact us using the inquiry form and our sales representatives will get in touch with you.
How do you proceed with the cleaning test?
We will discuss the cleaning object and your requirement etc., and then provide you with the optimal test plan. Please contact us using the inquiry form and our sales representatives will get in touch with you.
Do you do contract cleaning?
We are sorry, but we cannot respond to this request.
I want to repair my pump unit or peripheral parts, how can I do that?
If you wish to repair the unit by yourself, do so only after receiving the consumable parts, etc., in accordance with our instruction manual. If you have any trouble with malfunction or other symptoms, please contact us using the inquiry form and our staff will contact you.

About Spray coating equipment

What materials can be coated ?
We have experience to form coating film with general solvent, water- based, UV curing agents, slurry and multifunctional materials, but corrosive solutions cannot be handled. Please contact us using the inquiry form and our sales representatives will get in touch with you.
Please tell me the film formation accuracy.
Film thickness accuracy varies greatly depending on viscosity and boiling point of coating liquid, and shape of workpiece. Further, please contact us using the inquiry form, and our sales representatives will get in touch with you to ask coating liquid and workpieces you are considering in detail.
Can I coat 3D workpieces?
It is possible. Please contact us using the inquiry form and our sales representatives will get in touch with you.
How can I inquire at I want to carry out the test?
Please contact us and tell us "please want to do the demo" with the inquiry form and our sales representatives will get in touch with you. We will propose an experimental plan in the presence of our process engineer.
I want a quotation.
We will discuss the coating object, coating liquid and your requirement etc., and then provide you with the optimal quotation. Please contact us using the inquiry form and our sales representatives will get in touch with you

About Piezoelectric Sensor

[Piezoelectric Sensor in General] What kind of measurement method is available?
It is capable to measure ultrasonic reflected waves, the force and vibration applied to the sensor. It can also be used as an acoustic emission sensor (AE sensor).
[Ultrasonic Sensor] What can you measure with this?
In addition to the thickness of pipes and structural materials, and internal defects, the presence or absence of clogging and deposits on pipes (due to clogging substances) can be measured. If you contact us using the inquiry form, our technical staff will contact you.
[Ultrasonic Sensor] What kind of material can it be applied to?
It can be widely applied to general metal piping such as steel and stainless steel. It is also partially applicable to resins and ceramics. Sensitivity and measurement accuracy are influenced by the ultrasonic attenuation and scattering characteristics unique to the material. If you contact us using the inquiry form, our technical staff will contact you.
[Ultrasonic Sensor] What do you need for the measurement?
A measuring instrument such as an ultrasonic pulsar/receiver or an ultrasonic flaw detector is required to transmit and receive ultrasonic waves. It can be used by connecting to a commercially available standard pulsar/receiver or flaw detector. We also sell or rent our ultrasonic measurement unit (PC connectable). If you contact us using the inquiry form, our sales staff will contact you.
[Ultrasonic Sensor] Do you need a couplant (matching layer)?
It is necessary in principle. We propose a couplant suitable for the usage environment (temperature). We also support special applications such as direct attachment of sensors to piping.
[Pressure/Vibration Sensor] What do you need for the measurement?
Since the sensor itself outputs (generates) an electrical signal, you can check the operation if you have an instrument that can measure voltage (data logger, oscilloscope, etc.). We sell measurement units (PC connectable or analog output) that incorporate measurement circuits and amplifiers for stable measurement.
[Piezoelectric sensor in general] Is it possible to use it by incorporating it as a part of the measuring instrument/equipment?
We propose the optimum measurement method and design according to the equipment incorporating our sensor and the measurement target. We also provide custom samples (paid /free) to evaluate the performance after installation. If you contact us using the inquiry form, our technical staff will contact you.
[Piezoelectric Sensor in General] I would like a quote.
We will discuss the object to be measured and the measurement environment, and then submit the optimum quotation. If you contact us using the inquiry form, our sales staff will contact you.
[Piezoelectric Sensor in General] Do you perform contract measurement?
We accept contract measurement for consideration of purchasing our sensor for a charged base. If you contact us using the inquiry form, our technical staff will contact you.

CONTACT

Please feel free to contact with our division for any questions or concerns you might have about Precision cleaning equipment, Precision spray coating equipment and Piezoelectric Device.